Guide to purchase Server Cabinets

3C Electric - Before buying Server Racks and Server Cabinets are very difficult because manufacturers often use words glitzy advertising to keep high prices for their products. But privately with 3C Electric, customers have complete peace of mind and can easily select the appropriate product for their needs affordable and quality is guaranteed. 3C Electric has applied manufacturing processes ISO 9001:2008 and 14001:2005 for all its products Server Cabinets, to ensure to provide customers with perfect products and the best quality .

Here, 3C Electric customers should be sent to post instructions on how to select and buy Server Racks.

Selecting the height of Server Cabinet

First of all, customers should be noted that the height of the rack cabinet is measured in units of "U". This is the standard unit for all types of storage devices Rack, Rack 1U in height is 44.45mm. For outlet port 24 is expected to account for in 1U Rack.

First, customers need to measure the size of all the devices you want installed in the rack cabinet. In case if you want to add on devices that do not belong Rack, you should also advance the size of the device and change from unit to unit U 44.45mm, especially this equipment should be placed in a box in 1U Rack size.

  After measuring all dimensions of the device you want to put in rack cabinets, we recommend you to add about 10% to the width of the chamber when moving from room to cabinets Cabinets. So this will probably cost you a lot of effort and money.

U units represent only the inside of the cabinet size and cabinet Cabinet Rack, so you also need to ensure that the size of your office suit Cabinets you buy. For example you will have 42U Cabinets have inside dimensions 1867mm, however this will require cabinet size larger chamber, such as fan trays or containers will also account for an average of 250 to 300mm height, so the cabinet 42U cabinet office you need to have a minimum height is 2120mm.

Decisions Cabinet width of the cabinet you choose to buy

Typically, these types of Rack size will be about 600mm and 800mm width. For each type of cabinets you choose will be about 19'' angle for the device in the rack cabinet.

The main difference between 600mm and 800mm wide Rack is space for cable management. If you use Rack for cable connections, we recommend you choose a width of 80mm Rack cabinets because it will have more space for cable management.

Finally, you should pay special attention to meet the requirements of space but need to put in place your rack cabinet.

Depth of Cabinets

The depth of the cabinet Rack Cabinets becomes more and more important. Manufacturers can reduce the height of 1U to 2U cabinet range, however they are constantly increasing depth. So the product of the Rack Cabinets and we always have depth from 900mm to 1000mm. Because a certain principle is contained in the size of Server Rack can be from about 100 to less than 150 mm, this means that if your server thickness is 800mm, the cabinet depth is required 1000mm to newly installed equipment.

All kinds of Rack Cabinet by 3C Electric production and distribution are the angle of 19'' is placed before and after the inner cabinet. The angle bracket can be adjusted so you can optionally set closer or farther (depending on thickness less than the thickness of the entire outside is 150mm Rack) depends on the equipment you put in the closet .

The problem of ventilation Rack

Just like in computer equipment, server equipment should be well ventilated to ensure the good functioning. If not ensure this element, the function may be less active or deactivated. All Cabinets by 3C Electric production and distribution are vents on the roof (vents can be used the same wind to help control ventilation closet cabinet) and many grid located behind the door. We also provide you with various options can be mesh or hole diameter.

You should also make sure Server cabinet room should be ventilated and cooled.

Accessories for Cabinets

All of 3C Electric Cabinets are delivered to customers with a full range of essential parts, but we also provide a complete set of accessories to meet the special requirements of customers . This kit includes:

• Distributors: We supply the power distribution from 4 to 12 ports with multiple sockets. Distributors are also equipped with protection and accessories are installed on the ammeter.

 

• Drawer: If you plan to put more equipment is not installed in your server cabinet, you will need to put their drawer. So we offer 3 different types of drawers below:
     - Standard Drawer: The drawer will be placed in the corner coffee 19'' provide solutions for keeping small parts of the equipment installed in the rack cabinet.
     - Fixed Drawer: The drawer will be fixed before or after installation from the server to provide a more robust solution for supporting rack equipment in cabinets.
     - The interlocking drawer: The drawer will be mounted in front or behind cabinets Server to provide better solutions to help the installation of the equipment in the rack cabinet easier.

C-rack network cabinet, network cabinet, rack, network cabinet, rack, rack cabinet, c-, 42U rack, server rack

• The fan tray and fan unit: Here are two key positions in the cabinet rack to mount the fan unit standards from the server:
     - Fans are installed on the roof of Rack: The fan unit is installed in the rack cabinet according openings of the cabinet space not occupied. They are used to help get the air inside the cabinet cabinet is always open.
     - Fan is mounted inside the cabinet Rack: The fan unit is mounted on the tilt angle of 19'' Rack for the purpose of air around the cabinet in a request.

• Server Cabinet Legs column: The column foot is designed to support the cables leading into the rack cabinet. For cabinets Server, the column base will have a solid track to increase durability and prevent ousted from the server in case the server is too heavy to be pulled out or pulled into Cabinets.

 

• Cable Management: Keeping Your Server cabinets are tidy is very important, which is why we offer a choice of cable management accessories below:
     - Horizontal cable management bar: The bar will be installed at the angle of 19'' Server cabinets to help you lead the cables neat and effective when used tables or the adapter connector.
     - Jumper Rings: The type of accessories are mounted vertically for about 800mm width Cabinets to support the lead in cable from the server.
     - Brush Strip Panel: This type of accessory is mounted on a horizontal angle of 19'' Rack and is used to guide the cable around the outer cabinet.
     - Panels: If your server closet space any longer, you can use bulkhead fittings to hide the glitzy cables or devices you do not want others to see. These accessories are used particularly effectively if you order from the server at your office.
     - Fiber Tray: Type of accessories are usually placed in the cabinet on the Server (on the inside around or in the middle or rear of the cabinet Server) to help you lead the cables neat vertically in cabinets Server her.

• Console Drawers: In case your server cabinets are too tight, you can use the Console Drawer better alternative than to use the screen, mouse and keyboard separately. This type accounts for 1U accessories for a wide variety of screen sizes as well as different choices rich mouse input port, or you can also easily removed when not in use.

• Other accessories: Here are some other accessories we provide for our customers:
     - Standard Wheels: The only kind of Server Cabinets new production 3C Electric provide only the scroll wheel is used to transport Cabinets and simplify the installation of cabinets. You should not use the wheel is attached from the server when the device does not have the same volume. If you want to keep your server cabinets can be moved, use the wheel of our standard.
     - Tripod Cabinets: If you put your Cabinets on uneven ground, accessories are essential as they will help you to adjust the height of the lower leg to fit the cabinet floor.
     - The types of bolts and screws David: All the equipment rack is installed in accordance angle of 19'' and need to use bolts, screws M6 screw. All kinds of Rack needs a package this accessory.

Note: This guide was written based on standards and general manufacturing requirements. Actual product may differ with some descriptive detail. Customers should contact the Sales Department of 3C Electric to be full consultation before purchase.